Please find other blogs as follows at S/4HANA SQUARE ONE
S/4HANA SQUARE ONE
|NEW INSTALLATION||PART1 – MP||PART2 – Installation
||PART3 – BP Activation
||PART4 – Fiori Activation||PART5 – DATA MIGRATION|
|S/4HANA 1909||fps2 fps1 fps0||fps2 fps1 fps0||fps2 fps1 fps0||fps2 fps1 fps0||fps0|
|S/4HANA 1809||fps2 fps1 fps0||fps2 fps1 fps0||fps2 fps1 fps0||fps2 fps1 fps0|
||fps2 fps1 fps0||fps2 fps1 fps0||fps2 fps1 fps0|
|SYSTEM CONVERSION||t2 – RC||t3 – MP||t4 – SIC
||t5 – CCM||t6 – SUM|
|SAP S/4HANA ON-PREM APPLIANCE||INSTALL USING MEDIA||ACTIVATE FROM CAL|
|S/4HANA 1909||link – custom link – standard||link|
|SAP S/4HANA CERTIFICATION|
|S/4HANA Certification Exams through SAP Certification Hub||link|
Here is the Video for this blog based on 1909 FPS0 (Not FPS2 but process is similar):
The blog is based on SAP Note 2924004 – Composite SAP note: Rapid Activation for Fiori in S/4HANA 1909 FPS2 Please use the blog only as a reference and follow the actual note which may have been updated.
Please find the rough sketch of steps. There are 3 sets of steps that are separated by thick line. Your feedback is welcome on duration estimates. Activate Enterprise Search is kicked off and while it is running, further steps are done.
TIP: For notes applicable to other releases, please check the SAP Note 2902673 – Rapid Activation for SAP Fiori in SAP S/4HANA – Overview
In this blog the text is shown in this COLOR it is for selection and copy/paste
STEP 1: CHECK SAP FIORI UI COMPONENTS
(A) Enter tCode SPAM -> button Package Level, tab (1) Installed Product Versions, Check the below Product versions are installed – (2) SAP S/4HANA 1909 SP02 or higher and (3) SAP FIORI FOR S/4HANA 1909 SP02 & SAP FIORI FRONT-END SERVER 6.0 SP01.
(B) The S/4HANA system has to be with embedded Fiori deployment as per Note 2834415 – Composite SAP note: Rapid Activation for SAP Fiori in SAP S/4HANA 1909
(C) Ensure that SGEN is already completed on the system
(D) Proper ICF/ICM setup including FQDN
(E) Ensure the system is configured for SSL
icm/server_port_0 = PROT=HTTP,PORT=80$$,PROCTIMEOUT=600,TIMEOUT=600
icm/server_port_1 = PROT=HTTPS,PORT=443$$,PROCTIMEOUT=600,TIMEOUT=600
icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180
(F) Suggested memory parameters. The strategy here is to double the memory parameter until runtime errors do not occur any more. You can reset back these memory parameters after activation. You can copy and paste lines into instance profile.
abap/buffersize = 2500000 # Fiori Rapid Activation Help Doc
(G) Increase wprun timeout:
rdisp/max_wprun_time = 3600
(H) Please ensure that web dispatcher is setup correctly and working as it will be required before users can use the applications by logging in through the web dispatcher. Follow SAP Note 2740052 – Which paths are necessary to configure Web Dispatcher for Fiori Launchpad scenarios?
(I) Apply SAP Note 2712785 – Fiori Setup: Initial Setup for Fiori Applications S/4
Apply SAP Note 2686456 – Fiori Setup: Content Activation for SAP Business Roles
Apply SAP Note 2813396 – Fiori Setup: Content Activation for Business Roles
STEP 2: ACTIVATE ENTERPRISE SEARCH
In Work client, enter tCode STC01 – SAP_ESH_INITIAL_SETUP_WRK_CLIENT
TIP: All tasklists in this blog are to be performed in the work client
(A) Set TREX Destination or SAP HANA DB Connection” -> Make sure “Use SAP HANA Primary DB Connection” is ticked and Save(B) Select Models to Create Connectors” -> specify software component for search models: SAPAPPLH
(C) The first task has manual steps to be performed to click on icon in Status column.
Execute task and select Background, the job will run for 90 mins.
If you get error – Internal session terminated with a runtime error PXA_NO_FREE_SPACE (see ST22) please refer Note 2149849 – Runtime error PXA_NO_FREE_SPACE on ESH software component update which refers Note 147568 – PXA_NO_FREE_SPACE
Ensure PXA value in SAP profile abap/buffersize is enhanced, e.g. to 2.500.000 kB (Documentation)
TIP: While the Activate Enterprise Search task list is in progress in background you can do the activities form STEP 3 – 8 in parallel. The Fiori Content Activation task list should be done after the enterprise search is completed.
After task completion, the screen should look like this:
STEP 3: INSTALL DEPENDENT NOTES
Please install the Notes as below in Client 000:
- Note 1322182 – Memory consumption of ABAP Shared Objects
In tCode RZ11 check profile parameter abap/shared_objects_size_MB. I have this value set to 512. Keep in mind that if you get runtime error SYSTEM_NO_SHM_MEMORY or unhandled exception of type CX_SHM_OUT_OF_MEMORY you will have to increase this parameter. Alternatively you can set the automatic memory parameter PHYS_MEMSIZE.
STEP 4: INITIALLY FILL CUSTOMER TABLES
Enter tCode SU25, Make sure Step 1 “Initially fill the Customer Tables” has been at least executed two times. If date/time entry for this step is empty, click on the step and press execute (with default settings). Ref Note 440231 – SU25 | FAQ: Upgrade postprocessing for Profile Generator
Click on Execute
You should get application help dialog message that it will take several hours and log below. If not execute the same procedure second time and get the numbers as below.
Execute the same procedure second time and get the numbers as below.
STEP 5: ACTIVATE SAP S/4HANA EMBEDDED ANALYTICS
Ensure logical client is assigned to target client in SCC4
Execute manual steps as per Note 2289865 – Configuration steps for S/4HANA Analytics as shown below in work Client 100.
- Prerequisites: Check function module tCode SE16 table RSADMINA field BWMANDT in table RSADMINA isn’t filled.
If above is not set, use tCode SE37 RS_MANDT_UNIQUE_SET to set value of I_MANDT = 100
After above command is executed please check the value of BWMANDT in SE16 table RSADMINA
- In Client 100, Execute task list STC01 SAP_BW_SETUP_INITIAL_S4HANA.
- In the first step confirm that you have read the SAP Note 2303900 – Latest Information about BW Setup in S/4HANA Systems
Apply SAP Note 2866227- SAP_BW_SETUP_INITIAL_S4HANA: Task for checking/installing packages for BW OData services fails This note will require SAP Note 2704713.
- In the step Set/Check BW Client enter the BW Client number, and in the step Install essential BW Content checkmark on Force Installation. The task list will run for less than 15 minutes.
- Please do remaining optional steps as per the note for Hierarchies – 0YEA_QUA_MON_DAY, 0YEA_MON_DAY & 0WEEK_DAY
- Configuration of Design Studio Template
Activate the following services
STEP 6: ACTIVATE GATEWAY & FIORI ONE CLIENT SETUP
enter tCode STC01 – SAP_GW_FIORI_ERP_ONE_CLNT_SETUP
STEP 7: RUN FIORI FOUNDATION TASKLIST
Check that Note is applied as per STEP 1 – (I) SAP Note 2712785 – Fiori Setup: Initial Setup for Fiori Applications S/4
In Work Client, enter tCode STC01 – SAP_FIORI_FOUNDATION_S4
This task list activates (1) ICF Nodes (2) ODATA Services required for WebGUI and other generic Fiori launchpad features, (3) Initializes classic UI technologies, (4) Generates working SAP Fiori launchpad user & admin roles including composite roles.
Similarly add below to Admin profile Z_UI2_ADMIN_750 – Add Auth Object /UIF/LREP -> Edit /UIF/ROLE -> select using checkmark APFADMIN and Save
STEP 8: VALIDATION
Add role Z_FIORI_FOUNDATION_ADMIN to a test user.
Test using tcode /UI2/FLP or directly via url: https://vhcals4hci.dummy.nodomain:44300/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html
You should get screen below:
Click on the (1) Icon on top right and select (2) App Finder, you should get screen below
STEP 9: PREPARE LIST OF BUSINESS ROLES
From Fiori app reference library identify relevant business roles for activation. We will select all roles for the sandbox but you can restrict to only the required roles.
Select SAP Fiori apps for SAP S/4HANA, by Back-End Product, SAP S/4HANA
IMPORTANT TIP: In case you want to select all the Roles for certain scope items activated like BKP, 1Z3, 3QD, 1GA…. etc then click on the filter icon shown above and select the Scope Items.
(A) Select all (or alternatively you can select the roles you need), (B) Aggregate, (C) SAP S/4HANA 1909 FPS0, (D) Down Arrow, (E) Download
Click on Export list of Business Roles (281 roles for 1909FPS2 currently) and save the list as csv file. The number of roles may be different as new roles may be added or old ones deprecated.
TIP: You may find it convenient to remove the below roles and activate them separately after you perform steps as mentioned for each in Note 2834415.
|ROLE||ERROR IN TASK LIST – SAP_FIORI_CONTENT_ACTIVATION|
|Service: SM_INTEGRATION_SRV 1 failed / ICF Node: not available
RESOLUTION: tCode SE38: ABLM_MODIFY_ITEMS, TYPE: METH
NAME: GET_LAST_MODIFIED, MAIN OBJECT: CL_SM_INTEGRATION_MPC
(Disabled test mode, tick Allow Entry for Internal Usage)
|Service: C_MDPRODUCTHIERARCHYQUERY_CDS 1 failed / ICF Node: not available|
|Service UI_LO_SETMAN_SDOC_MAN 1 not found / ICF Node: –
RESOLUTION: Activation of OData V4 service groups is currently not supported. Activate the service manually via transaction /IWFND/V4_ADMIN
|SAP_BR_AP_MANAGER||Service: C_DAYSPAYABLESOUTSTANDING_CDS 1 failed / ICF Node: not available
RESOLUTION: SAP Note 2954170 – C_DAYSPAYABLESOUTSTANDING_CDS 1 failed / ICF Node: not available
|Service: ODATA_FM_COMMITMNT_ITEM_MANAGE_SRV 1 fail / ICF Node: not available
RESOLUTION: Apply SAP note 2907080 – Manage Commitment Item App: GL Account not assigned
|SAP_BR_QUALITY_ENGINEER||Service: C_QUALITYLEVELANALYSIS_CDS 1 failed / ICF Node: not available|
|SAP_BR_PA_REPRESENTATIVE||Service: NPA_BILLINGEXCPTN_SRV 1 failed / ICF Node: not available
RESOLUTION: Please do not use this role
Split the list of roles into lists with number of roles limit around 100. Also prepare separate list for roles with presteps. So you must have at least 4-5 lists of roles that you want to use for next step considering you want to activate all roles.
TIP: You should prepare your own list of roles. I have prepared a list of roles for S/4HANA releases that is shared in the link. There are 2 files for roles that were downloaded from Fiori App Library – These 2 lists include only the roles that do not have any issues. If you get error one time rerun the same list second time. There is one list for the roles that need presteps. And there are 2 more files with lists for roles that are available in SAP instance. All these lists are available also in a spreadsheet S4HANA1909FPS2_FioriRapidActivation_BusinessRoles.xls
As per the files from the link as shown below, the Master list excel file contains all the roles. These roles are split into 5 text files – If you want to activate all fiori apps, you can select roles from text file S4HANA1909FPS2_FioriRapidActivation_BusinessRoles_List1_FioriAppLIbrary.txt and activate the these 100 roles. The you can take the second file and activate the 115 roles. After that you can select the file 3 with 2 roles which require presteps. Then you can review if any roles are required from the file 4 and 5. These roles are not output form Fiori App Library and some of them may not be relevant for Fiori.
Here is the time it took for my activation
|FILE||#_OF_ROLES||FIRST RUN||SECOND RUN||THIRD RUN|
|List2_FioriAppLIbrary (in parallel with List1)||84||20min||8min|
|List3 FioriApp Library||86||40min||5min||8min|
|List4_withPreStep (in parallel with List3)||8||5min|
STEP 10: ACTIVATE FIORI CONTENT
PRE-STEPS: If you don’t need these roles you can skip this step.
(A) This is required for roles SAP_BR_PROJ_FIN_CONTROLLER & SAP_BR_PROJ_LOG_CONTROLLER.
tCode SE38, ABLM_MODIFY_ITEMS,
TYPE: METH, NAME: GET_LAST_MODIFIED
MAIN OBJECT: CL_SM_INTEGRATION_MPC,
(Disable test mode, tick Allow Entry for Internal Usage).
(B) Others will be added later as solutions become available for roles with issues
SAP_BR_AP_ACCOUNTANT_PROCUREMT – activate manually via /IWFND/V4_ADMIN
SAP_BR_SET_CLERK – activate manually via /IWFND/V4_ADMIN
SAP_BR_PA_REPRESENTATIVE – do not use
TIP: Before scheduling Content Activation task list ensure that task list for Activate Enterprise Search from STEP 2 is completed.
In Work Client, enter tCode STC01 – SAP_FIORI_CONTENT_ACTIVATION
The 438 roles in S4HANA 1909 as you see below have many country specific roles like SAP_BR_AA_ACCOUNTANT_JP , etc. There are 12 roles just with *_JP. So don’t try to activate all roles as some of them are country specific and industry specific.We strongly recommend to customers to do a conscious decision about the role scope to be activated.
In the first task, (A) checkmark first task, (B) Click on Parameter and paste the list into the box that pops up, click on OK (Continue) at the bottom of the Define Business Roles” dialog window, and then click on (C) execute.
After clicking OK for the first task, if there are errors as below, please remove the roles that have no SAP Business Role and move the others into list that requires presteps and handle them separately.
Please see below for triggering activation of 100 roles:
TIP NO 1: Run the task list above in background (use menu option). While the task list is running, please check dumps in ST22 in separate session.
TIP NO 2: If all ODATA/SICF are activated for the first time, each group of about 100 roles takes about two+ hours. But if you get an error and then you reactivate the same list it should be done in few minutes. If some ODATA services are already activated the time required should be reduced accordingly.
TIP NO 3: TIME SAVING TECHNIQUE – Once you have the list of roles, you can split the roles into multiple lists like say if you have 200 roles, split them into 2 sets of 100 roles. You can then create 2 separate sessions and run the task list. Keeping the number of roles in these 2 sessions unequal will help to know the session, like keep 98 roles in first session and 102 helps to distinguish them. I had to increase the parameter abap/shared_objects_size_MB = 512 to 768 to run parallel session. Alternatively you can set the automatic memory parameter PHYS_MEMSIZE.
TIP NO 4: After activating a role like for example SAP_BR_AP_MANAGER, if the ODATA/SICF are already activated, the delta role SAP_BR_AP_MANAGER_US takes much shorter time as some services are already activated. So as a result your subsequent lists will take lesser time than earlier ones.
TIP NO 5: If you get error first time, please try with same list second time and some errors may go away. Like the below list of errors reduced to no errors for second run. One of the reasons for this is – the service activation is a generation and can finish successfully later on after the logs show error. So on retry the activation finished successfully.
TIP NO 6: For the subsequent activation run, if you get error Not enough shared memory exists, you can clear the shared memry in tCode SHMM. If you dont have access to SHMM or if there is possibility of impacting other users and processes, easiest way is to logout and login. If this does not work, double the parameter abap/shared_objects_size_MB = 512 as per Note 2766677 – Not enough shared objects memory exists, will require SAP bounce.
At the end of activation you should see result as below:
STEP 11: POST ACTIVATION
Please ensure that web dispatcher is setup correctly and working as it will be required before users can use the applications by logging in through the web dispatcher.
TIP: As a Post Activation step you can revert back Memory Parameters that were temporarily increased for activation.
COMPONENT FOR INCIDENTS:
You can open OSS messages using component BC-INS-TC-CNT
Please mention the SAP Fiori UI software components
There is a transport capability added to the Fiori launchpad content manager task list SAP_FIORI_FCM_CONTENT_ACTIVATION
Please refer the blog for more information: SAP Fiori for SAP S/4HANA – New Rapid Content Activation on S/4HANA 1909, 1809 & 1709 – Part 4 – Customize & Transport
You can also refer the Fiori Launchpad Content Manager as per SAP Help Portal below: https://help.sap.com/viewer/d4650bf68a9f4f67a1fda673f09926a9/latest/en-US/c2f3f66fc2e04f3ea5ede6bcd4d087ec.html
For a more detailed description of all tasks please refer to the excellent blogs
Fiori for S/4HANA – New Rapid Content Activation on S/4HANA 1809 & 1709 – Part 1 – Overview
Fiori for S/4HANA – New Rapid Content Activation on S/4HANA 1809 & 1709 – Part 2 – Prerequisites & Foundation
Fiori for S/4HANA – New Rapid Content Activation on S/4HANA 1809 & 1709 – Part 3 Scope & Execute Content Activation
Fiori for S/4HANA – New Rapid Content Activation on S/4HANA 1809 & 1709 – Part 4 – Customize & Transport
SAP Fiori for SAP S/4HANA – SAP Fiori Rapid Activation: Transport from Development to Production systems
SAP Fiori for SAP S/4HANA – Transition from Standalone to Embedded Deployment in SAP S/4HANA
Note 2902673 – Rapid Activation for SAP Fiori in SAP S/4HANA – Overview <=Contains all release specific notes
Note 2895644 – Composite SAP note: Rapid Activation for Fiori in S/4HANA 1909 FPS1
Note 2834415 – Composite SAP note: Rapid Activation for Fiori in S/4HANA 1909
Note 2777142 – Composite SAP note: Rapid Activation for Fiori in S/4HANA 1809 FPS01 <=FPS1,FPS2
Note 2704570 – Composite SAP note: Rapid Activation for Fiori in S/4HANA 1809 <= for FPS0 only
Thank you. Hope you enjoyed the blog !
Product Expert – S/4HANA